Ultimate solution – Power-Engine 5 band mobile phone signal booster to improve 3G 4G 5G calls and data services

Description

It’s hard enough coordinating a big business, but having to do that with bad connection quality is even harder. So this device is created to help you out of that mess. Our attractively designed Power Engine All Networks signal booster tops all other boosters and supports multiple frequency bands. It will boost your poor outside calls and 3G 4G 5G signal from all providers, from mediocre 3 bars to full 5 instantly on 800/900/1800/2100/2600 MHz frequencies, giving you a steady, high-quality connection every time. The model is a top of the line product that supports multiple frequency bands (800MHz, 900MHz, 1800MHz, 2100MHz and 2600MHz) thanks to its 5-band repeater. The adjustable controls all you to change your signal preferences for smoother voice and data transmissions. Experience improved signal strength regardless of your phone’s present coverage strength or frequency band! The Booster supports all major carrier company network services. Our products are rigorously tested and offer a perfect 5-bar signal wherever you are. Our quick installation kit comes complete with instructions and takes less than 15 minutes to set up. Our Products are also completely harm-free. Please do not hesitate to contact our staff of highly trained professionals available 24/7 should you experience any problems with your booster. Satisfaction guaranteed!
Note: 5G services are subject to provider’s signal coverage.

[table id=New1-bandBenefitsandFeatures /]

How to install the kit?
The signal booster can be installed in less than 15 minutes will our full installation kit and simple directions.  You will be up and running in no time at all!  The attractive design of our signal booster is paired with “5-bar” signal capability in urban or rural areas throughout the entire country.  Our 24/7 technical support staff is made up of trained professionals who are there to assist you with whatever you need.  Our signal boosters and excellent service are just what you need and is worth every penny!
Quick Steps of Installation
1. Find a good stable signal source outside of your property, in an open space, preferably on a higher altitude. If possible, roof top. Place outdoor antenna there in a way that
(A) for directional antenna, i.e. LPDA, Yagi or Panel antenna, its direction points to the cell tower.
(B) for omni-directional antenna, i.e. Pipe antenna, its direction points to sky vertically and without obstacles around, DO NOT care cell tower direction.
2. Connect the outdoor antenna to “Outdoor ANT” port of the booster with a 15-meter cable or enough length cable
3. Place indoor antenna at the central site of your preferable coverage, without obstacles around, and connect indoor antenna to “Indoor ANT” port of the booster with a 5m cable
4. Power on the booster, check working status

How to aim an outdoor directional antenna correctly?
If you don’t know exactly where your operator’s base station/cell tower is located, go through the antenna aiming process for getting the best result. To aim the antenna correctly, follow the steps below:
1. Setup the entire booster system, including antennas and cables, and power it on.
2. A person on the roof aims the antenna in a certain direction. The other person inside checks signal level on the phone.
3. Then rotate the antenna its 1/8th of the way around, which equals 45 degrees. The person inside does the same procedure with signal testing.
4. Repeat the process 8 times until you try all 8 directions, in every 45 degrees sector.
5. Compare the results of signal testing to get the best booster performance.
6. Fix the antenna in the direction with better signal result.

The adjustments seem too much complicated for me to do and I do not have other person to help, do you have much easier installation of outdoor antenna?
Yes, we definitely have such solution. Adopt a high gain pipe antenna, make it point to the sky vertically, do not care the direction of cell tower.
There is an option for you to upgrade LPDA direction antenna to omni-directional Pipe antenna in “Need Easier Installation of Outdoor Antenna?” option.Do not hesitate to choose it.

[table id=NewTechSpec5-BandPow /]