Pro Max dual band cell signal booster to improve calls & 3G, 4G data services

(16 customer reviews)

£330.00

Filters Sort results
Reset Apply
Key Features
Application
Network Services
Frequency Bands
800
/
900
MHz
(Band
20
|
8
)
Coverage
up to 600m²
Ideal for
Providers Supported
A Standard Kit includes
1x Booster + Power Adapter
1x Indoor Ceiling Antenna
1x Outdoor High Gain LPDA Antenna
1x 15-meter Ultra Low Loss Cable
1x 5-meter Ultra Low Loss Cable
2-Year Warranty
30-Day Money Back
Need Extra internal antenna(s) ?
None 1x ceiling antenna (omni-directional) +£25.00 1x panel antenna (directional) +£35.00 2x ceiling antennas (omni-directional) +£45.00 1x ceiling antenna + 1x panel antenna +£55.00 2x panel antennas (directional) +£65.00

Description

Filters Sort results
Reset Apply
This dual-band Pro Max version signal booster is a superstar when it comes to providing crystal clear voice and data coverage in an area with a poor outside signal and 800/900MHz frequency range. It will boost all major operators’ network signals in the 800MHz/900MHz frequency. Once it’s installed you can expect instant 5-Bar coverage. For versatile signal coverage, you can’t go wrong with this powerful booster. With our easy installation kit and 24/7 customer service, this signal booster can be up and run in less than 15 minutes.
This booster works with:
Show moreShow less
What makes our boosters different?
1. Equipped with an advanced DSP for high-efficiency signal processing.2. Delivers radio spectrum performance that surpasses industry standards.3. Features a unique intelligent decision-making system that adapts in real time to on-site signal strength, creating professional-grade signal boosters with exceptional reliability.
5-level signal filtering effectively eliminates noise and out-of-band emissions, preventing interference to cellular base stations.
1. RADIO EMC EMF SAFETY tests verify no harm to human health and no interference to cell stations.2. Radio Equipment Directiive CE certified. Ofcom Exemption.
Automatic standby mode when idle, energy-efficient and long-lasting performance.
How to install the booster kit?
1. Find a strong outdoor signal sourceChoose an open area outside your property, preferably at a higher elevation (e.g., rooftop). Place the outdoor antenna by type:A - Directional antennas (LPDA, Yagi, Panel): Point directly toward the cell tower, with no obstacles nearby.B - Omni-directional antenna (Pipe antenna): Point vertically toward the sky, with no obstacles nearby (cell tower direction is irrelevant).2. Connect the outdoor antennaUse the 15-meter cable (or sufficient length) to connect the outdoor antenna to the “Outdoor ANT” port on the booster.3. Place and connect the indoor antennaPosition the indoor antenna in the central area of the target coverage zone, keeping it clear of obstacles. Use the 5-meter cable (or sufficient length) to connect it to the “Indoor ANT” port on the booster.4. Power on the booster. Check the LED indicators on the booster to confirm normal operation (refer to LED State Explanation below).
Easy to understand booster working status
Power LED
Green – Power ON (normal)
Dark - No power supply
Down Link LED (DL/P) - Signal Amplification Status
Dark - No signal received
Blue - Weak signal received, working.
Green - Good working state
Bright Red - Optimal working state.
Up Link LED (UL/P) - Calling & Alarm Status
Dark - No calls, standby state
Flicker - Calls/internet active, working state
Solid Red - Alarm, check installation.
What to do in ALARM state - Turn off the booster, check installation per the troubleshooting section in the full user manual. The booster will resume normal operation automatically after the issue is resolved.
Technical Specifications
Frequency Bands
Band
20
|
8
Linear Gain (UL/DL)
Upon outside signal conditions
Output Signal Power
Upon coverage
ALC/AGC Range
≥ 20dB
MGC Adjustment Range (optional)
Max 31dB in step of 1dB
Noise Figure @ Full Gain
≤ 6dB
In Band Ripple
≤ 5dB
Group Delay
≤ 5μs
VSWR
≤ 1.8dB
Spurious Emission
9KHz ~1GHz ≤ -36dBm/100KHz1GHz ~12.5GHz ≤ -30dBm/1MHz
Inter-modulation
≤ -40dBc
Return loss
≤- 8 dB
Max. Input Power Without Damage
0 dBm
Frequency Stability
≤0.01ppm
MTBF
>50000 hours
System Impedance
50Ω
AC Power Requirements
100 ~ 240VAC / 45 ~ 65Hz
CE certification
RED CE

16 reviews for Pro Max dual band cell signal booster to improve calls & 3G, 4G data services

4.9
Based on 16 reviews
5 star
87
87%
4 star
12
12%
3 star
0%
2 star
0%
1 star
0%
1-5 of 16 reviews
  1. JG

    When I was hunting for an amplifier brand, I wanted a compact one because my house has limited space. When I placed my order, I had doubts about its performance, but the unit proved me wrong. It has really strengthened the signal inside my house.

  2. NG

    I had zero service in my house to 3 to 4 bars. I never loose service what a wonderful product.

  3. JA

    I’m more than pleased. The product works fine. The technical support team helped greatly to solve my installation problems.

  4. FB

    I’m completely satisfied with your product and your service in general. Thank you!

  5. EP

    At first I was quite skeptical about functioning of this device. So didn’t mind purchasing it as it came with return guarantee and warranty. So far it has been working smoothly

Add a review
Pro Max dual band cell signal booster to improve calls & 3G, 4G data services Pro Max dual band cell signal booster to improve calls & 3G, 4G data services
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review