Power-Engine Band N28 5G mobile signal repeater to improve calls and internet data services

(10 customer reviews)

£490.00

Filters Sort results
Reset Apply
Key Features
Application
Frequency Bands
700
MHz
(Band
28
)
Coverage
up to 1000m²
Ideal for
Providers and Services
A Standard Kit includes
1x Booster + Power Adapter
1x Indoor Ceiling Antenna
1x Outdoor General LPDA Antenna
1x 15-meter Low Loss Cable
1x 5-meter Low Loss Cable
2-Year Warranty
30-Day Money Back
Upgrade outdoor antenna | Easier installation
None omni-directional antenna +£75.00
Need Extra internal antenna(s) ?
None 1x ceiling antenna (omni-directional) +£25.00 1x panel antenna (directional) +£35.00 2x ceiling antennas (omni-directional) +£45.00 1x ceiling antenna + 1x panel antenna +£55.00 2x panel antennas (directional) +£65.00

Description

Filters Sort results
Reset Apply
Our model is the most up-to-date solution for voice network boosting of 700MHz signal amplification support. It is a single-band repeater specially designed for weak outside signal condtions and provides signal enhancement in a wide range. They can boost the signal strength of all major network operators throughout the country. The signal booster can be installed in less than 15 minutes with our full installation kit and simple directions. You will be up and running in no time at all! The attractive design of our signal booster is paired with “5-bar” signal capability in urban or rural areas throughout the entire country. Our 24/7 technical support staff is made up of trained professionals who are there to assist you with whatever you need. Our signal boosters and excellent service are the answers to all your signal problems!
This booster works with
The Booster also supports Mobile Virtual Network Operators (MVNOs) associated with the supported host network operators.
What makes our boosters different?
1. Equipped with an advanced DSP for high-efficiency signal processing.2. Delivers radio spectrum performance that surpasses industry standards.3. Features a unique intelligent decision-making system that adapts in real time to on-site signal strength, creating professional-grade signal boosters with exceptional reliability.
5-level signal filtering effectively eliminates noise and out-of-band emissions, preventing interference to cellular base stations.
1. RADIO EMC EMF SAFETY tests verify no harm to human health and no interference to cell stations.2. Radio Equipment Directiive CE certified. Ofcom Exemption.
Automatic standby mode when idle, energy-efficient and long-lasting performance.
How to install the booster kit?
1. Find a strong outdoor signal sourceChoose an open area outside your property, preferably at a higher elevation (e.g., rooftop). Place the outdoor antenna by type:A - Directional antennas (LPDA, Yagi, Panel): Point directly toward the cell tower, with no obstacles nearby.B - Omni-directional antenna (Pipe antenna): Point vertically toward the sky, with no obstacles nearby (cell tower direction is irrelevant).2. Connect the outdoor antennaUse the 15-meter cable (or sufficient length) to connect the outdoor antenna to the “Outdoor ANT” port on the booster.3. Place and connect the indoor antennaPosition the indoor antenna in the central area of the target coverage zone, keeping it clear of obstacles. Use the 5-meter cable (or sufficient length) to connect it to the “Indoor ANT” port on the booster.4. Power on the booster. Check the LED indicators on the booster to confirm normal operation (refer to LED State Explanation below).
Easy to understand booster working status
Power LED
Green – Power ON (normal)
Dark - No power supply
Down Link LED (DL/P) - Signal Amplification Status
Dark - No signal received
Blue - Weak signal received, working.
Green - Good working state
Bright Red - Optimal working state.
Up Link LED (UL/P) - Calling & Alarm Status
Dark - No calls, standby state
Flicker - Calls/internet active, working state
Solid Red - Alarm, check installation.
What to do in ALARM state - Turn off the booster, check installation per the troubleshooting section in the full user manual. The booster will resume normal operation automatically after the issue is resolved.
Technical Specifications
Frequency Bands
Band
28
Linear Gain (UL/DL)
Upon outside signal conditions
Output Signal Power
Upon coverage
ALC/AGC Range
≥ 20dB
MGC Adjustment Range (optional)
Max 31dB in step of 1dB
Noise Figure @ Full Gain
≤ 6dB
In Band Ripple
≤ 5dB
Group Delay
≤ 5μs
VSWR
≤ 1.8dB
Spurious Emission
9KHz ~1GHz ≤ -36dBm/100KHz1GHz ~12.5GHz ≤ -30dBm/1MHz
Inter-modulation
≤ -40dBc
Return loss
≤- 8 dB
Max. Input Power Without Damage
0 dBm
Frequency Stability
≤0.01ppm
MTBF
>50000 hours
System Impedance
50Ω
AC Power Requirements
100 ~ 240VAC / 45 ~ 65Hz
CE certification
RED CE

10 reviews for Power-Engine Band N28 5G mobile signal repeater to improve calls and internet data services

4.9
Based on 10 reviews
5 star
90
90%
4 star
10
10%
3 star
0%
2 star
0%
1 star
0%
1-5 of 10 reviews
  1. RD

    Being a freelancer, communication is key. Luckily, now I don’t have to worry about poor connection.

  2. LM

    This device improved my internet connection so now I can comfortably do my research online. Thanks!

  3. GG

    I have installed the mobile booster in my house, connecting it to an antenna with a folding edge on the roof. It boosts signals from (previous) 0-1 bar to 3-5 bars. I can also access the Internet and upload videos wherever I am thanks to the product.

  4. CW

    The previous reviews for the product made me acquire one and the results were awesome.

  5. AT

    Customer service resolved our issue instantly – turned out we’d installed the antenna incorrectly! Once we’d sorted it out we saw a difference immediately! Full marks!

Add a review
Power-Engine Band N28 5G mobile signal repeater to improve calls and internet data services Power-Engine Band N28 5G mobile signal repeater to improve calls and internet data services
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review